LSA-PLUS® HighBand
With the HighBand® product range, ADC KRONE has once again proven, that its reputation as a technology leader is well deserved. In terms of transmission properties, HighBand modules surpass virtually all connection technology systems on the market. Through optimum performance, the HighBand series makes modern communications networks fit for the requirements of the future.
Application
With greatly improved transmission properties and a considerably increased transmission bandwidth, HighBand modules are perfect for high-speed LAN and WAN systems. In structured cabling systems or carrier networks, the HighBand series forms the basis for future-ready networks for high-bit-rate IP data traffic, multimedia content or high-resolution, interactive TV services.
Contact types
The LSA-PLUS® HighBand series is available as a disconnection module and switching module for 8 and 10 pairs.
Features
HighBand modules with a disconnection contact make it possible to connect up to ten incoming and ten outgoing cable pairs. This module is ideal if maximum transmission performance and a line disconnection option are required.
HighBand modules with switching contacts make it possible to connect up to 20 incoming and 20 outgoing cable pairs. This module is suitable for applications where maximum transmission performance is required, but no line disconnection option is necessary. Most HighBand modules are suitable for use in Category 6 networks. The connection density is 440 pairs per metre of rack length.
Mounting systems
The modules mount using the LSA PROFIL mounting systems with a 75 mm centre-to-centre distance (Ø 12 mm). Note: All LSA PROFIL modules from the HighBand series can also be snapped on to backmount frames
from this series.
Accessories
Testing and switching For testing purposes, 2, 4 and 8-pin adapter cords are available. The 2-pin cord is used for accessing connection or disconnection modules in parallel. The 4-pin cord can be used for targeted measurement of the outgoing or incoming direction in disconnection modules. The 8-pin cord is used in Ethernet networks (LAN). For temporary connections, ADC KRONE offers a wide variety of patch cords.
Labelling and marking
Labels and transparent covers are available for comprehensive marking of circuits.
Specific jumper tracks can also be identified with one-pair marking caps and protected against accidental access. Disconnection plugs are used to break connections at the centre contact of the disconnection modules.
Overvoltage protection
For the HighBand modules, ADC KRONE offers a magazine or single protection plugs.
Application
With greatly improved transmission properties and a considerably increased transmission bandwidth, HighBand modules are perfect for high-speed LAN and WAN systems. In structured cabling systems or carrier networks, the HighBand series forms the basis for future-ready networks for high-bit-rate IP data traffic, multimedia content or high-resolution, interactive TV services.
Contact types
The LSA-PLUS® HighBand series is available as a disconnection module and switching module for 8 and 10 pairs.
Features
HighBand modules with a disconnection contact make it possible to connect up to ten incoming and ten outgoing cable pairs. This module is ideal if maximum transmission performance and a line disconnection option are required.
HighBand modules with switching contacts make it possible to connect up to 20 incoming and 20 outgoing cable pairs. This module is suitable for applications where maximum transmission performance is required, but no line disconnection option is necessary. Most HighBand modules are suitable for use in Category 6 networks. The connection density is 440 pairs per metre of rack length.
Mounting systems
The modules mount using the LSA PROFIL mounting systems with a 75 mm centre-to-centre distance (Ø 12 mm). Note: All LSA PROFIL modules from the HighBand series can also be snapped on to backmount frames
from this series.
Accessories
Testing and switching For testing purposes, 2, 4 and 8-pin adapter cords are available. The 2-pin cord is used for accessing connection or disconnection modules in parallel. The 4-pin cord can be used for targeted measurement of the outgoing or incoming direction in disconnection modules. The 8-pin cord is used in Ethernet networks (LAN). For temporary connections, ADC KRONE offers a wide variety of patch cords.
Labelling and marking
Labels and transparent covers are available for comprehensive marking of circuits.
Specific jumper tracks can also be identified with one-pair marking caps and protected against accidental access. Disconnection plugs are used to break connections at the centre contact of the disconnection modules.
Overvoltage protection
For the HighBand modules, ADC KRONE offers a magazine or single protection plugs.
PRODUCT
