LSA-PLUS® Series 2
The LSA-PLUS® Series 2 module was developed for universal use in all telecommunications or data network applications. Thanks to the broad product portfolio and the extensive range of accessories, the application possibilities of the Series 2 modules are virtually unlimited.
Application
The LSA-PLUS Series 2 modules are used worldwide to connect and link up cable leads securely in internal and external areas: in main distribution frames of xchanges, in cross-connection cabinets and terminating boxes, in building entrance distributors, in floor distributors or in PABXs for voice and data distribution.
Contact types
The LSA-PLUS Series 2 is available as a connection module, disconnection module or switching module for 8 and 10 pairs, and as an earth module, for unshielded lines. For shielded circuits, it is available as a 2/6x3 disconnection module or switching module, and as a 2/8x3 disconnection module.
Features
The LSA-PLUS Series 2 module is characterised primarily by its broad product portfolio and extensive range of accessories.
The unique design of the LSA-PLUS Series 2 module guarantees quick and secure operability with an extremely low circuit fault rate. The test contact and/or the disconnection contact are immediately accessible via the jumper contact, separately for each pair. This means that testing and jumpering can be carried out easily and conveniently. The connection density is 440 pairs per metre of rack length.
Mounting systems
In view of the numerous installation variants and different cable volumes for Series 2, backmount frames with various pitch dimensions (22.5 mm, 25 mm or 27.5 mm),
various mounting depths (12 to 50 mm) and with a varying hole pattern are available for snapping on the modules. Another mounting option is the LSA PROFIL® fixing system (Ø 12 mm) for mounting LSA PROFIL modules.
Note:
All LSA PROFIL modules of Series 2 can also be snapped on to backmount frames.
Accessories
Labelling and marking
Folding shield frames that are snapped on to the module allow each separate pair to be identified individually. The PROFIL module shield frame is used for block marking and can also be used for both backmount frames and profile rod systems. All shield frames are supplied complete with small white paper shield frames and a transparent cover and are available in variants for 8 and 10 pairs. Marking caps are used to mark individual pairs in order to identify specific lines or protect them against accidental switching. Disconnection plugs are used to break connections at the centre contact of the disconnection modules. One-pair dummy plugs can be used to mark important cables and to prevent the accidental disconnection of important connections in disconnection modules. Number flags can be used to number the modules or the cable pairs in the connection block. Cover strips protect the connections against unauthorised access.
Testing and switching
For uninterrupted switching, switching adapters and disconnection adapters for 1 pair or 10 pairs are available. For temporary connections, ADC KRONE offers a wide variety of patch cords. For testing purposes, 2 and 4-pin adapter cords are available. There is a variety of cords with 2 or 4 plugs or sockets to choose from. All cords have a plug adapted to the Series 2 modules. The 2-pin cord is used for accessing connection or disconnection modules in parallel. The 4-pin cord is used for targeted measurement of the outgoing or incoming direction in disconnection modules.
Overvoltage protection
For Series 2 modules, magazines for 2 and 3-pin arrestors are available. When plugged into connection modules, a surge voltage resistance of 5kA or 10kA (8/20μs) is achieved depending on the variant. Moreover, one-pair protection plugs for flexible use are available in the following categories: general protection plugs, general and current protection plugs, graded protection and maintenance-free raded protection.
Other accessories
For shielded leads, ADC KRONE offers special cable take ups, shield connections, cable guides and shield frames.
Application
The LSA-PLUS Series 2 modules are used worldwide to connect and link up cable leads securely in internal and external areas: in main distribution frames of xchanges, in cross-connection cabinets and terminating boxes, in building entrance distributors, in floor distributors or in PABXs for voice and data distribution.
Contact types
The LSA-PLUS Series 2 is available as a connection module, disconnection module or switching module for 8 and 10 pairs, and as an earth module, for unshielded lines. For shielded circuits, it is available as a 2/6x3 disconnection module or switching module, and as a 2/8x3 disconnection module.
Features
The LSA-PLUS Series 2 module is characterised primarily by its broad product portfolio and extensive range of accessories.
The unique design of the LSA-PLUS Series 2 module guarantees quick and secure operability with an extremely low circuit fault rate. The test contact and/or the disconnection contact are immediately accessible via the jumper contact, separately for each pair. This means that testing and jumpering can be carried out easily and conveniently. The connection density is 440 pairs per metre of rack length.
Mounting systems
In view of the numerous installation variants and different cable volumes for Series 2, backmount frames with various pitch dimensions (22.5 mm, 25 mm or 27.5 mm),
various mounting depths (12 to 50 mm) and with a varying hole pattern are available for snapping on the modules. Another mounting option is the LSA PROFIL® fixing system (Ø 12 mm) for mounting LSA PROFIL modules.
Note:
All LSA PROFIL modules of Series 2 can also be snapped on to backmount frames.
Accessories
Labelling and marking
Folding shield frames that are snapped on to the module allow each separate pair to be identified individually. The PROFIL module shield frame is used for block marking and can also be used for both backmount frames and profile rod systems. All shield frames are supplied complete with small white paper shield frames and a transparent cover and are available in variants for 8 and 10 pairs. Marking caps are used to mark individual pairs in order to identify specific lines or protect them against accidental switching. Disconnection plugs are used to break connections at the centre contact of the disconnection modules. One-pair dummy plugs can be used to mark important cables and to prevent the accidental disconnection of important connections in disconnection modules. Number flags can be used to number the modules or the cable pairs in the connection block. Cover strips protect the connections against unauthorised access.
Testing and switching
For uninterrupted switching, switching adapters and disconnection adapters for 1 pair or 10 pairs are available. For temporary connections, ADC KRONE offers a wide variety of patch cords. For testing purposes, 2 and 4-pin adapter cords are available. There is a variety of cords with 2 or 4 plugs or sockets to choose from. All cords have a plug adapted to the Series 2 modules. The 2-pin cord is used for accessing connection or disconnection modules in parallel. The 4-pin cord is used for targeted measurement of the outgoing or incoming direction in disconnection modules.
Overvoltage protection
For Series 2 modules, magazines for 2 and 3-pin arrestors are available. When plugged into connection modules, a surge voltage resistance of 5kA or 10kA (8/20μs) is achieved depending on the variant. Moreover, one-pair protection plugs for flexible use are available in the following categories: general protection plugs, general and current protection plugs, graded protection and maintenance-free raded protection.
Other accessories
For shielded leads, ADC KRONE offers special cable take ups, shield connections, cable guides and shield frames.
PRODUCT
